How To Flash Stock ROM Firmware Using SPD Upgrade Flash Tool

There are instruction to Flash Stock Rom or any custom Rom using SPD Upgrade Flash Tool (spd Flash Tool) on windows computer.

Requirement: Your Android Smartphone Should have been at-least 40-50 percent of battery to perform flashing process.

Flash Stock ROM Firmware Using Smart Phone Flash Tool

Step 1: Now get started, first of all you download the firmware file on your computer. Once done, extract the zip file on your computer. Now download SPD Upgrade Tool, and IMEI tool and install it on your computer.

Step 2: Now download USB drivers in your computer and install it. Once done, launch the SPD Upgrade Tool by click on the “ResearchDownload.exe” file.

Step 3: Once the SpreadTrum upgrade tool is launched, click on “Load Pocket” as shown in the screenshot below.

Step 4: Now choose the firmware file and click on “Open” as shown below.

Step 5: Once the firmware file is loaded in the tool, connect your Android device to the computer using the original USB data cable. Next, click on the “Start Downloading” button to begin the flashing process.

Step 6: During the stock firmware flashing process, your device will reboot for several times. So don’t panic.

Step 7: Once the flashing process is finished, you will see the “Previous Passed” message in green color as shown in the screenshot below.

That’s it. You have successfully flashed stock ROM firmware on your Android smartphone device. Now use the IMEI tool provided in the firmware file and flash original IMEI of your device. Once done, unplug your device from the computer and enjoy the native Android experience again.

If you encounter any issues while following this firmware installation tutorial, do let me know via comments.
How To Flash Stock ROM Firmware Using SPD Upgrade Flash Tool How To Flash Stock ROM Firmware Using SPD Upgrade Flash Tool Reviewed by 9Jarom on January 27, 2018 Rating: 5