How To Flash Stock ROM Firmware Using Rockchip Batch Tool

There are instruction to Flash Stock Rom or any custom Rom using Rockchip Batch Tool (Rockchip Flash Tool) on windows computer.



Requirement: Your Android Smartphone Should have been at-least 40-50 percent of battery to perform flashing process.


Flash Stock ROM Firmware Using Rockchip Batch Tool


Step 1: Now get started, first of all you download the firmware file on your computer. Once done, extract the zip file on your computer.

Step 2: Now Download Rockchip Driver Assistant and install it on your computer. Once done, download Rockchip Batch Tool and extract it to a folder in your computer.



Step 3: Now open the “Rockchip Download Tools.exe” file. After the Rockchip Download Tools is launched, click on […] button and select the .img firmware file from Step 1.



Step 4: Once the firmware is loaded, switch off your device and connect it to your computer while pressing and holding the Volume Up Key. Hold the Volume Up key in your device until the icon “1” under “Connected Devices” in RK batch tool turns green.



Step 5: Now click on the “Restore” button to start the flashing process.



Step 6: It will take 5-8 minutes for the flashing process to get completed and once it does, you will be able to see the “Upgrade Done Success” message as shown in the screenshot below.


Step 7: Once flashing is completed, unplug your smartphone from the computer.

That’s it. You have successfully flashed stock ROM firmware on your Android smartphone device. Once done, unplug your device from the computer and enjoy the native Android experience again.


If you encounter any issues while following this firmware installation tutorial, do let me know via comments.
How To Flash Stock ROM Firmware Using Rockchip Batch Tool How To Flash Stock ROM Firmware Using Rockchip Batch Tool Reviewed by 9Jarom on February 10, 2018 Rating: 5