How To Flash CPB Firmware Using YGDP Flash Tool

There are instruction to Flash Stock Rom or any custom Rom using YGDP Flash Tool (YGDP Tool) on windows computer.



Requirement: Your Android Smartphone Should have been at-least 40-50 percent of battery to perform flashing process.

Flash CPB Firmware Using YGDP Flash Tool:

Step 1: Now get started, first of all you download the firmware file on your computer. Once done, extract the zip file on your computer. Now download YGDP Flash Tool, and install it on your computer.



Step 2: Now download USB drivers in your computer and install it.



Step 3: Once YGDP tool is launched it will ask you to provide the Login code, do not worry put 369 or 9527 and login to your software.



Step 4: In the YGDP Tool window, click on “Config” to open up “Download Configuration” settings.



Step 5: Now in the Download Configuration settings, click on the folder icon under “Please Select CPB File” and choose your firmware file. Once the firmware file is added, click on “Apply” to save changes.



Step 6: Next, switch off your device and remove its battery (if it is possible). Once done, connect your Android device to the computer using the original USB data cable.



Step 7: Now click on the “Start” button in YGDP Flash tool to launch the flashing process.



Step 8: It will take a minute or two for the flashing process to get completed and once it does, you will see the “Upgrade Successful” message as shown below.


Note :

That’s it. You have successfully flashed stock ROM firmware on your Android smartphone device. Once done, unplug your device from the computer and enjoy the native Android experience again.


If you encounter any issues while following this firmware installation tutorial, do let me know via comments.
How To Flash CPB Firmware Using YGDP Flash Tool How To Flash CPB Firmware Using YGDP Flash Tool Reviewed by 9Jarom on April 16, 2018 Rating: 5